Surface Infrared Motion Sensor 360° 300W IP44

The IP44 surface-mounted infrared motion sensor allows the lighting to switch on automatically when movement is detected, helping to improve convenience and prevent lights from remaining on unnecessarily.

Thanks to its infrared detection technology, it offers a range of up to 6 metres and is designed for installation at a height of approximately 2.2 to 4 metres. It supports a maximum LED load of 300W, allowing several luminaires to be controlled from a single sensor.

One of its main advantages is the ability to adapt its operation to each installation. It allows you to adjust the switch-on time from 10 seconds to 7 minutes and set the ambient light level between 3 and 2000 lux, defining the lighting conditions under which the sensor should activate the lights.

Its IP44 protection rating provides protection against small solid objects and splashing water, expanding its installation possibilities compared with a conventional indoor sensor. This makes it especially suitable for bathrooms, entrance areas, covered porches, garages and other spaces protected from direct exposure to rain, provided that the installation conditions specified by the manufacturer are followed.

Main features:

• Maximum range: 6 metres.
• Recommended installation height: 2.2–4 m.
• Detection angle: 360°.
• Adjustable light sensor: 3 to 2000 lux.
• Time setting: 10 seconds to 7 minutes.
• Maximum load: 300W LED.
• Power consumption: 0.5W.
• Input polarity protection.